Location: ]PLC]Product Information]APB PLC
 

APB Series PLC

Features:

Main module: 12\22\24 points; Extension module: 22 points; It

is flexible for extending, and the optimal max. configuration: 7 I/O
extension modules, 1 voice module, and 1 SMS module;

Program memory capacity: 320 FBDs, EEPROM;

It is allowed to place a Li-ion battery to power the clock;
Under the circumstance of DC12-24V, the main machine at
most has 12 voltage analog inputs 0-10V, 2 current analog inputs
4-20mA and 2 analog outputs 4-20mA;
High-speed operation: at most 4 high-speed inputs 10KHZ and
2 high-speed outputs 10KHZ;
MODBUS protocol, and can be connected to SH-300 (Text
Panel);
New function blocks: pulse width modulation (PWM), pulse
output (PTO), ACC, SMS and analog calculation etc.;

Technical Parameters

Item

APB-12MRD(L)

APB-12MTD(L)

APB-12MGD(L)

APB-22MRA(L)

APB-24MRDL

APB-22MRD(L)
APB-22MTD(L)
APB-22MGD(L)
APB-12MRA(L)

Surge Immunity

  2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5)

Electrostatic Discharge (outer casing)

  \8kv(air discharge)/\6kv(contact discharge), Level 3 (IEC61000-4-5)

Ambient Temperature

 -10≧゛+55≧

Storage Temperature

 -40≧゛+70≧

Ambient Humidity

 5%゛95%RH

Degree of Protection

  IP20(Non-waterproof)

Installation

  Fixing with M3 screws or Standard DIN rail mounting

Dimensions (mm)

  71*99*58.5(12 points)126*99*58.5(22 points)126*99*58.5(24 points)

Programming Language

 FBD

Points

  12 points/22 points/24 points/can support 7 I/O extension modules

Memory Capacity

  320 FBDs

Filtering Duration of Input Signal

  It can be set to improve the stability of signal

Real-time Clock

  160h,can place a Li-ion battery if it is necessary

Password Protection

  Multiple passwords protection

High-speed Operation

  At most 4 high-speed inputs 10KHz, and 2 high-speed outputs 10KHz

Analog Operation

  At most 12 voltage 0-10V and 2 current 4-20mA analog inputs, and 2 analog outputs 0/4-20mA

Power Failure Protection

  Yes

Simulate Monitoring

  Yes

Communication Interface

  TTL interface; besides, communication module supports 2 RS485 and 1 RS232 interfaces

Baud Rate

 9600bps

Communication Protocol

 MODBUS RTU

Power Supply

Rated Voltage

DC12-24V

DC12-24V

DC12-24V

AC110-220V

DC12-24V

Permissible Range

DC11-28V

DC11-28V

DC11-28V

AC85V-265V

DC11-28V

Power Consumption

3.5w
--
--
--
--

Digital Input

Input Type

NPN/PNP

NPN/PNP

NPN/PNP

NPN/PNP

NPN/PNP

Input Signal 0

DC0-5V

DC0-5V

DC0-5V

AC0-70V

DC0-5V

Input Signal 1

DC8.5-28V

DC8.5-28V

DC8.5-28V

AC85-265V

DC8.5-28V

Isolation

Non-isolation

Non-isolation

Non-isolation

Photoelectric isolation

Non-isolation

Isolated Group

--

--

--

14

--

Isolated Voltage

--

--

--

2500/5000Vr.m.s

--

Digital Output

Output Type

Relay

Transistor(NPN)

Transistor(PNP)

Relay

Relay

Rated Voltage

24VDC/220VAC

24VDC

24VDC

24VDC/220VAC

24VDC/220VAC

Isolation Method

Relay isolation

-

-

Relay isolation

Relay isolation

Analog Input

Input Type

(DC0-10V)/8 inputs

(DC0-10V)/8 inputs

(DC0-10V)/8 inputs

--

(4-20mA)/2 inputs

(DC0-10V)/12 inputs
(DC0-10V)/12 inputs
(DC0-10V)/12 inputs
(DC0-10V)/12 inputs

Analog Output

Output Type

--

--

--

--

4-20mA/2inputs

A/D Conversion

--

--

--

--

12 bits

Isolation

Non-isolation

Non-isolation

Non-isolation

Non-isolation

Non-isolation

High-speed Operation

 

Input Type

4 inputs /10KHz

4 inputs /10KHz

4 inputs /10KHz

--

4 inputs /10KHz

Support single-phase counter and two-phase counter Support single-phase counter and two-phase counter Support single-phase counter and two-phase counter
--
Support single-phase counter and two-phase counter

 

Output Type

 

--

2 outputs / 10KHZ

2 outputs /10KHZ

 

--

 

--

Supports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulse

Supports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulse
Type

Note: The economical type is supplied without LCD panel, and the basic type is supplied with LCD panel.

APB-12MRD(L)

DC12V-24V

8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports

4 points relay output

APB-12MTD(L)

DC12V-24V

8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports

4 points NPN transistor output

Q2、Q3 can be high-speed output ports

APB-12MGD(L)

DC12V-24V

8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports

4 points PNP transistor output

Q2、Q3 can be high-speed output ports

APB-22MRA(L)

AC100V-240V

14 points input

8 points relay output

APB-22MRD(L)

DC12V-24V

14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports

8 points relay output

 

APB-22MTD(L)

DC12V-24V

14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports

8 points NPN transistor output

Q2、Q3 can be high-speed output ports

APB-22MGD(L)

DC12V-24V

14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports

8 points PNP transistor output

Q2、Q3 can be high-speed output ports

APB-24MRDL

DC12V-24V

2points for current input, and 14points for digital input (the first 12 points can be 0~10V analog inputs); I4-I7 can be high-speed ports

6 points relay output + 2 analog outputs

APB-22ERA

AC100V-240V

14 points digital input

8 points relay output

APB-22ERD

DC12V-24V

14 points digital input

8 points relay output

APB-22ETD

DC12V-24V

14 points digital input

8 point NPN transistor output

APB-22EGD

DC12V-24V

14 points digital input

8 point NPN transistor output

Auxiliary Module

APB-SMS

supports I/O control and SMS alarm, as well as receives and sends short message in another mode

APB-EXPMC

applied in the long-distance signal transmission interface and constitutes a nerwork with 485 bus

APB-EXNET

use cable network and TCP/IP protocol to link the remote network

 
Dimensions

Take the 12 points module as an example. The 12 points, 22 points, and 24 points modules and other extension modules share the same width and height, the only one difference exists in the length.

 

Type

Dimensions(mm)

12 points main module

71*99*58.5

22 points main module

126*99*58.5

24 points main module

126*99*58.5

I/O extension module

126*99*58.5

SMS extension module

126*90*47.5